How to Install Short Shifter in Hyundai Tiburon: Step-by-Step Guide

To install a short shifter in a Hyundai Tiburon, remove the stock shifter and replace it with the new one. Ensure all connections are secure.

Installing a short shifter in your Hyundai Tiburon can significantly enhance your driving experience. This modification reduces the distance between gear shifts, providing quicker and more precise transitions. The process is straightforward and can be completed with basic tools. A short shifter improves not only the performance but also the sporty feel of your car.

Before starting, make sure you have the necessary tools and a clean workspace. Follow the instructions carefully to avoid any issues. This upgrade is a popular choice among car enthusiasts seeking better control and a more engaging drive.

How to Install Short Shifter in Hyundai Tiburon: Step-by-Step Guide

Credit: www.youtube.com

Preparation

Before installing a short shifter in your Hyundai Tiburon, proper preparation is key. This section will guide you through the essential steps to ensure a smooth and safe installation process. Let’s dive into the necessary precautions and tools required for this task.

Safety Precautions

Safety should always come first. Here are some important safety tips:

Disconnect the battery: This prevents any electrical shocks.
Wear safety gloves: Protect your hands from sharp objects.
Use safety goggles: Shield your eyes from debris.
Park on a flat surface: Ensure the car is stable.
Engage the parking brake: Prevent the car from moving.

Gathering Necessary Tools

Having the right tools makes the job easier and faster. Here is a list of tools you will need:

Tool	Purpose
Socket wrench set	Removing bolts and screws
Flathead screwdriver	Prying and lifting panels
Phillips screwdriver	Removing screws
Needle-nose pliers	Handling small parts
Lubricant spray	Ensuring smooth operation

Once you have all the necessary tools and safety gear, you are ready to begin the installation process. Ensure all tools are within reach and the workspace is well-lit.

Removing The Old Shifter

Removing the old shifter is the first step in installing a short shifter in your Hyundai Tiburon. This process involves careful steps to ensure you do not damage any components. Follow the guide below to easily remove your old shifter.

Accessing The Shifter Assembly

First, you need to access the shifter assembly. Start by parking your car on a flat surface. Engage the parking brake for safety. Next, locate and remove the center console. This usually involves unscrewing a few bolts and clips. Carefully lift the console to expose the shifter assembly. You should now see the shifter and its surrounding components.

Detaching The Shifter Knob

Now, you need to detach the shifter knob. Most shifter knobs are screwed onto the shifter lever. Grip the knob firmly and turn it counterclockwise. It should unscrew easily. If it is tight, use a cloth for a better grip. Once the knob is off, set it aside. You will need it later when installing the new shifter.

Installing The Short Shifter

Installing a short shifter in a Hyundai Tiburon enhances the driving experience. It reduces the gear throw, making gear changes quicker and more precise. This guide will walk you through the steps of installing a new short shifter.

Positioning The New Shifter

First, remove the center console to access the shifter assembly. Use a screwdriver to unscrew the bolts holding the console. Lift the console gently to avoid damaging any wires.

Next, remove the old shifter by unscrewing the bolts at its base. Carefully lift the old shifter out of its position. Place the new short shifter in the same spot. Make sure it aligns with the mounting points.

Securing The Shifter Base

With the new shifter in place, secure it by tightening the bolts. Ensure the shifter base is firmly attached to avoid any wobble. Use a torque wrench to tighten the bolts to the manufacturer’s specifications.

Reconnect any wires or cables that were detached during the removal process. Test the shifter by moving it through each gear to ensure smooth operation.

Finally, replace the center console and screw it back into place. Your new short shifter is now installed and ready for use.

Credit: tuscanicustoms.com

Reassembling Components

Once you’ve installed the short shifter in your Hyundai Tiburon, it’s time to reassemble the components. This ensures everything works smoothly and looks neat. Follow these steps carefully to complete the reassembly process.

Reattaching The Shifter Knob

First, place the shifter knob back on the shifter stick. Make sure it aligns properly with the threads. Twist the knob clockwise until it is tight. Do not overtighten, as it may damage the threads.

If the knob has a locking nut, screw it in place. This will prevent the knob from loosening over time. Ensure the knob is secure and comfortable to grip.

Reconnecting The Shifter Boot

Next, align the shifter boot with the base of the shifter stick. Make sure it covers the shifter assembly. This keeps dust and debris out of the mechanism.

Secure the shifter boot using the clips or screws. These should be the same ones you removed earlier. Double-check that the boot is snug and does not move.

Finally, test the shifter to ensure it moves smoothly. Shift through all gears to confirm proper alignment. If everything feels right, your reassembly is complete!

Testing The Installation

After installing the short shifter in your Hyundai Tiburon, it’s crucial to ensure everything works perfectly. Testing the installation helps identify any adjustments needed to achieve smooth and precise shifting.

Shifting Through Gears

Start the engine and test each gear. Move through the gears from first to sixth, including reverse. Ensure each gear engages smoothly without any resistance or grinding sounds.

Listen for any unusual noises. These may indicate improper installation or other issues. Proper gear engagement is vital for a safe and enjoyable driving experience.

Adjusting If Necessary

If the gears do not shift smoothly, adjustments are necessary. Follow these steps:

Loosen the bolts securing the shifter.
Realign the shifter to ensure proper gear engagement.
Tighten the bolts securely.

After adjusting, test the gears again. Repeat the process until shifting is smooth and effortless.

Issue	Possible Cause	Solution
Gear grinding	Misalignment	Realign the shifter
Hard shifting	Loose bolts	Tighten the bolts
Unusual noise	Improper installation	Check the installation

Ensure each adjustment is tested thoroughly. This ensures the short shifter works perfectly in your Hyundai Tiburon.

Credit: tuscanicustoms.com

Troubleshooting Common Issues

After installing a short shifter in your Hyundai Tiburon, you might face some common issues. Knowing how to troubleshoot these problems can save you time and stress. Below, we will address some frequent concerns and provide simple solutions.

Loose Shifter

A loose shifter can make driving uncomfortable. Here are some steps to fix it:

Check the bolts: Ensure all bolts are tight. Loose bolts can cause the shifter to wobble.
Inspect the bushings: Worn bushings can lead to a loose shifter. Replace them if needed.
Adjust the linkage: Sometimes, the linkage needs adjustment. This will help tighten the shifter.

Issue	Possible Cause	Solution
Loose Shifter	Loose bolts	Tighten all bolts
Loose Shifter	Worn bushings	Replace bushings
Loose Shifter	Linkage misalignment	Adjust linkage

Difficulty In Shifting Gears

Difficulty in shifting gears can disrupt your driving experience. Follow these steps to resolve it:

Lubricate the shifter: Lack of lubrication can cause stiffness. Use a proper lubricant.
Check the alignment: Misalignment can make shifting hard. Realign the shifter as needed.
Inspect the clutch: A faulty clutch can affect shifting. Ensure the clutch is in good condition.

Lubricate the shifter: Use grease or oil.
Realign the shifter: Follow the installation manual.
Inspect the clutch: Check for wear or damage.

By addressing these common issues, you can ensure a smoother driving experience. Always refer to your Hyundai Tiburon’s manual for specific details.

Maintenance Tips

Maintaining your short shifter in a Hyundai Tiburon ensures smooth gear shifts. Proper maintenance extends the life of your shifter. Below are essential maintenance tips.

Lubrication

Lubrication is crucial for smooth operation. Apply grease to the moving parts. Focus on the pivot points and linkages. Use high-quality automotive grease. Avoid over-lubricating as it can attract dust. Clean the area before applying grease.

Periodic Checks

Perform regular checks to ensure everything is tight. Inspect the bolts and screws holding the shifter. Tighten any loose parts immediately. Look for signs of wear and tear. Replace worn-out parts to avoid future problems.

Inspection Point	Frequency	Action
Pivot Points	Monthly	Lubricate
Linkages	Monthly	Lubricate
Bolts and Screws	Quarterly	Tighten

Check for unusual noises during shifts.
Ensure the shifter moves smoothly.
Keep the shifter area clean and free from debris.

Keep these tips in mind to enjoy a hassle-free driving experience.

Related Guides-

Frequently Asked Questions

What Tools Are Needed To Install A Short Shifter?

To install a short shifter, you’ll need basic hand tools. These include a socket set, screwdrivers, and a torque wrench. Having a car jack and stands can also be helpful for easier access.

How Long Does It Take To Install A Short Shifter?

Installing a short shifter typically takes about 1-2 hours. This can vary depending on your experience. Always follow the instructions provided with the short shifter kit for best results.

Can A Beginner Install A Short Shifter?

Yes, a beginner can install a short shifter. It’s a straightforward process with basic tools. Follow the step-by-step instructions in the kit. Watching tutorial videos can also be helpful.

Will A Short Shifter Improve My Driving Experience?

A short shifter can significantly improve your driving experience. It reduces the throw distance between gears, providing faster and more precise shifts. This leads to a sportier and more engaging driving feel.

Conclusion

Installing a short shifter in your Hyundai Tiburon enhances driving performance. Follow our guide for a smooth installation process. Enjoy quicker shifts and a sportier feel. Ensure all tools are ready and take your time. Now, your Tiburon is ready for an upgraded driving experience.

Happy driving!